TUBULAR CABLE LUG, 35 MM2, Ø 6 MM
Skyllermarks tubular cable lugs are made of tinned copper and it´s annealed twice. Use these to make your own “Skyllermarks Cables”.
Correctly pressed these tubular cable lugs doesn´t let any oxygen into the copper wires in the cable. They are deliberately designed without an inspection hole to not let any oxygen into the cable.
Since they have the proper thickness and is double annealed they doesn´t spring back after pressing which any tubular cable lugs of poor quality and terminals of brass always does. When hex compressing our cable lugs you will obtain perfect holding power, density and contact with the copper wire.
4 pc package.
Skyllermarks tubular cable lugs are made of tinned copper and it´s annealed twice. Use these to make your own “Skyllermarks Cables”.
Correctly pressed these tubular cable lugs doesn´t let any oxygen into the copper wires in the cable. They are deliberately designed without an inspection hole to not let any oxygen into the cable.
Since they have the proper thickness and is double annealed they doesn´t spring back after pressing which any tubular cable lugs of poor quality and terminals of brass always does. When hex compressing our cable lugs you will obtain perfect holding power, density and contact with the copper wire.
4 pc package.
KAAPELIKENKÄ 35 MM2 Ø 6 MM
Tuotekoodi: RK1090
Myymälässä: Tilapäisesti loppu
Verkkokaupassa: Loppu toimittajalta.
Toimitusaika-arvio: Arvioitu toimitusaika 28.06.2025
Hinta:
15,00
€
1500
€17,10 €
1710
Määrä: kpl
Tinatut ja kahteen kertaan hehkutetut putkikaapelikengät antavat parhaan mahdollisen kontaktin kuparikaapelille. Umpinaisen rakenteen vuoksi ja oikein puristettuna ne suojaavat kuparikaapelia hapettumiselta ja antavat kestävän liitoksen. Tuplahehkutuksen vuoksi kupari on jäykempää ja pitää paremmin muotonsa puristuksen jälkeen.
Pakkauskoko: 4 kpl
Pakkauskoko: 4 kpl
Arvostele tämä tuote
Tälle tuotteelle ei ole vielä annettu arvosteluita.
