• Modern shape and simplified two seam barrel design.
• The unique patented covers are built into the pivot for permanent use and concealing the screws.
• Push cover to snap in place. Can be unsnapped by using a small flat-head screwdriver.
• Fits different countersink screw types.
• Silicon caulking on cover is required for specific application use.
• Passes 500 hours salt-spray test.
• If this hinge is mounted in the pocket, make sure to have enough room around the hinge leaves to allow the covers to be snapped down.
• 39.6 x 78mm, 1-9/16' X 3-1/16'
• The unique patented covers are built into the pivot for permanent use and concealing the screws.
• Push cover to snap in place. Can be unsnapped by using a small flat-head screwdriver.
• Fits different countersink screw types.
• Silicon caulking on cover is required for specific application use.
• Passes 500 hours salt-spray test.
• If this hinge is mounted in the pocket, make sure to have enough room around the hinge leaves to allow the covers to be snapped down.
• 39.6 x 78mm, 1-9/16' X 3-1/16'
PERHOSSARANA 39,6X78MM
Tuotekoodi: 0319313 YLÄTAPPI AISI316
Myymälässä: Tilapäisesti loppu
Verkkokaupassa: Loppu toimittajalta.
Toimitusaika-arvio: Arvioitu toimitusaika 10.02.2027
Hinta:
20,00
€
2000
€22,35 €
2235
Määrä: kpl
• Modern shape and simplified two seam barrel design.
• The unique patented covers are built into the pivot for permanent use and concealing the screws.
• Push cover to snap in place. Can be unsnapped by using a small flat-head screwdriver.
• Fits different countersink screw types.
• Silicon caulking on cover is required for specific application use.
• Passes 500 hours salt-spray test.
• If this hinge is mounted in the pocket, make sure to have enough room around the hinge leaves to allow the covers to be snapped down.
• 39.6 x 78mm, 1-9/16' X 3-1/16'
• The unique patented covers are built into the pivot for permanent use and concealing the screws.
• Push cover to snap in place. Can be unsnapped by using a small flat-head screwdriver.
• Fits different countersink screw types.
• Silicon caulking on cover is required for specific application use.
• Passes 500 hours salt-spray test.
• If this hinge is mounted in the pocket, make sure to have enough room around the hinge leaves to allow the covers to be snapped down.
• 39.6 x 78mm, 1-9/16' X 3-1/16'
Arvostele tämä tuote
Tälle tuotteelle ei ole vielä annettu arvosteluita.
